自交联型丙烯酸酯共聚物乳液的研究

以羟甲基丙烯酰胺、丙烯酸作为活性单体，采用种子乳液聚合法制得四元体系自交联型丙烯酸酯共聚物乳液。用透射电镜观察了乳胶粒的微观形态，并对共聚物乳液的流变性，稳定性等进行了测试，考察了羟甲基丙烯酰胺和丙烯酸的含量、聚合方式对共聚物乳液性能的影响。     

含苯环亲水共聚物形态及溶液荧光

研究含芳环（生色团）的亲水性高分子对于了解高分子结构和性质之间的关系，开发新型发光材料很有意义[1.2]．前文[3.4]借报道了N-乙烯基咋冷丙烯酸共聚物（NVC－AA）的合成及发光性能研究，本文报道含苯环亲水高分子苯乙烯一丙烯酸共聚物（ST－AA）的微观结构与荧光特性?..     

Photogeneration of Silver Particles in PVA Fibers and Films

Fibers and films prepared from blends of poly(vinyl alcohol) and poly(acrylic acid) were found to be suitable matrices for the solid-state photoreduction of silver ions in the presence of air. Fast generation of nanometer-sized silver crystallites was observed when fibers of polymer blends crosslinked with dimethyl sulfoxide were irradiated with 350nm light. Optical determinations of the formation kinetics were carried out using thin films of noncrosslinked as well as lightly and heavily crosslinked polymer blends. Small Ag clusters were detected initially, which were stable in the dark but transformed into larger metal particles upon further illumination. Both formation processes occurred only under high light intensity illumination and the kinetic data were inconsistent with monophotonic mechanisms.     

Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.     

Highly stretchable and self-healing hydrogels based on poly(acrylic acid) and functional POSS

Herein, we present a novel way for the production of self-healing hydrogels with stretch beyond 4200% than their initial length and relatively high tensile strength(0.1?0.25 MPa). Furthermore, the hydrogel was insensitive to notch. Even for the samples containing V-notches, a stretch of 2300% was demonstrated. The hydrogels were developed by in situ crosslinking of the self-assembled colloidal poly(acrylic acid)(PAA)/functionalized polyhedral oligomeric silsesquioxane(POSS) micelles. This was achieved by the addition of functionalized polyhedral oligomeric silsesquioxane with tertiary amines and hydroxyls(POSS-AH) into the PAA reaction solution. The POSS-AH led to micellar growth, then the dualcrosslinked network was constructed. One type of crosslink was formed by hydrogen-bonding and ionic interactions between PAA chains and POSS-AH, the other type of crosslink was formed by covalent bonds between PAA and bis(N,N'-methylenebis-acrylamide).     

Tetralactam-modified gold electrodes for amperometric detection of acrylic acid

The presence of toxic acrylamide in a wide range of food products such as potato crisps, French fries or bread has been confirmed by Swedish scientists from Stockholm University. The neurotoxicity and possible carcinogenicity of this compound and its metabolites compel us to control them by quantitative and qualitative assays. Exposing acrylamide to pH extremes results in its hydrolysis to acrylic acid or its salt. In this work, we present the use of gold electrodes coated with self-assembled monolayers (SAMs) containing tetralactam molecules and its precursor as active elements for voltammetric detection of acrylic acid in water solution. The host molecules have been immobilised on the electrode surface by covalent Au–S bond or by embedment method into the thiol layer via hydrophobic and van der Waals interactions. Interactions with analytes were confirmed by Osteryoung square-wave voltammetry.     

Synthesis,structural characterization and in vitro cytotoxic activity of novel polymeric triorganotin(IV) complexes of urocanic acid

Two novel triorganotin carboxylate complexes of the biologically active urocanic acid have been synthesized and characterized. Elemental analysis, melting point, spectroscopic techniques – IR, ¹H, ¹³C and ¹¹⁹Sn NMR – mass spectrometry and X‐ray diffraction studies have been used for structural characterization. Crystal structures of the tin(IV) derivatives show that urocanic acid acts as a bridging bidentate ligand through its imidazole nitrogen atom and its carboxylic group, producing a polymeric one‐dimensional chain. The molecular structures of the complexes, catena‐poly‐tri(n‐butyl)tin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (1) and catena‐poly‐triphenyltin(IV) 3‐(3H‐imidazol‐4‐yl)prop‐2‐enoate (2), present a distorted trigonal–bipyramidal configuration. This is further confirmed by ¹¹⁹Sn NMR in the solid state. The tin(IV) derivatives form double‐stranded ribbons via N―H^…O―H bonds. Nevertheless, the compounds are essentially monomeric in solution, with a tetrahedral configuration as observed by ¹¹⁹Sn NMR in solution. The cytotoxic activity of the titled compounds has been tested against six human cell lines and the corresponding IC₅₀ values are reported. Both tin(IV) compounds have a high to very high in vitro cytotoxic activity against the tumor cell lines K562, HCT‐15 and MCF‐7. Compound 1 is 86 times more active than cisplatin in the HTC‐15 cell line. Copyright © 2012 John Wiley & Sons, Ltd.     

Block copolymers containing polyacrylamide and polyacrylic acid: Bulk structure and hydrogen bonds system

Asymmetric block copolymers PAAc-b-PAAm (DBCs) and PAAm-b-PAAc-b-PAAm (TBCs) comprised poly(acrylic acid) blocks of constant chain length and polyacrylamide blocks of variable chain length were synthesized using RAFT/MADIX technique. Their properties in a bulk state were studied by differential scanning calorimetry and the hydrogen bond system was investigated by Fourier transform infrared spectroscopy. It was found that DBCs and TBCs possess a homogeneous amorphous structure, whose temperatures of glass transition and destruction beginning increased with growth of PAAm block length. The H-bond system between PAAc and PAAm blocks was most developed in TBC sample and formed manly by the mixed cyclic dimmers of carboxyl and amide groups.     

Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.     

Small molecule‐mediated glass transition of acrylic copolymers: Effect of hydrogen bonding strength on glass transition temperature

Poly(styrene‐co‐ethyl acrylate) [P(St‐co‐EA)] with different ratios of St/EA was mixed with the small molecule 4,4′‐thio‐bis(6‐tert‐butyl‐m‐methyl phenol) (AO300) to investigate the influence of hydrogen bonding strength on the glass transition behavior. The glass transition temperature (T_g) linearly increased after adding AO300, and the slope value decreased with increased St/EA ratio. All lines could be extended to 62 °C, demonstrating that T_g of the small molecule in situ detected by the polymer chain was much higher than that by small molecule itself (29 °C). Fourier transform infrared spectroscopy analysis showed that the small molecules began to be self‐associated at a concentration where the hydrogen bonded carbonyl ratio of the bulk polymer was approximately 0.5 and irrespective of the St/EA ratio. Above the critical loading, the mixture's T_g negatively deviated from the linearly extended lines because of self‐association of the small molecules. The apparent T_g of AO300 was found to strongly depend on intermolecular hydrogen bonding number and strength. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 400–408